Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting

Better Negative Scans Using Flat Field Correction in Lightroom

Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Goemmer Butte and La Veta, July 2017. Kodak Portra 400.

I’ve written a few posts about camera-scanning film negatives and converting the negatives in Lightroom. I’ve been beyond thrilled with the results produced by Negative Lab Pro, but one lingering issue I’ve seen is a lack of uniform color across the frame and particularly in the corners caused by uneven lighting of the negative when scanning. I’ve had to manually apply fairly strong vignetting correction in the Lens Corrections panel to correct for this issue.

Here’s an example showing the manually corrected image with the settings followed by the uncorrected scan after conversion. You can see that because the digitized negative is dimmer near the edges of the frame, the inverted image is brighter in those areas. In addition to being brighter, the colors are thrown off as well. And although the “corrected” image is better, the colors and brightness are still visibly uneven near the edges of the frame.

Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Vignetting Correction Applied
Moab, Utah, August 2001

Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Vignetting Correction Settings

Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
No Vignetting Correction Applied
Moab, Utah, August 2001

In the 8.3 release of Lightroom Classic, Adobe added the Flat-Field Correction tool designed to remove shading and color cast from images. The tool corrects for shading using a calibration frame that is shot using the same optical setup as used for photographing negatives. Simply shoot a calibration frame before or after shooting a roll of negatives, then use the Flat-Field Correction tool to automatically detect and analyze the calibration frame and remove the light falloff and color cast from your negative scans. (It turns out this tool has been available as a plugin from Adobe Labs for several years, but I don’t recall ever reading about it when researching camera scanning of film negatives.)

With my scanning workflow, I shot my roll of negatives, then removed the negative carrier from the front of the rail, set the camera to manual focus so that the light source was out of focus and adjusted the exposure (I had to reduce the exposure time since the light source by itself is much brighter), then shot the calibration image. Then in Lightroom, I turned on automatic Lens Corrections and set the white balance on the calibration frame, then ran Flat-Frame Correction before making any adjustments to the scanned negatives. The tool runs quickly and exports the corrected images as DNG raw files. The original raw files are removed from the Lightroom catalog but preserved on the drive (there is an option to delete the original raw files after correction-I recommend leaving it OFF.)

So how well does it work? Take a look at the photo below. The top image is the converted raw file without Flat-Field Correction applied. The lower image is the same capture processed after Flat-Field Correction. I also included the calibration frame below the comparison for reference. (Keep in mind that the square 6×6 negative was captured from the center portion of this frame. The shading effect is even more detrimental when capturing 35mm negatives that fill the frame.) The effects of shading are most visible in the lower right side of the image where the greenery is brighter and more yellow. In the shading-corrected image, the colors and brightness are uniform across the photo. It is also apparent that Negative Lab Pro provided a much better overall conversion of the negative when the shading had been corrected.

Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Not flat field corrected
Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Flat field corrected
Better Negative Scans Using Flat Field Correction in Lightroom 120, 35mm, camera scanning, color, color correction, digitizing, dslr scanning, film, Flat Field, Flat-Field Correction, lens, negative, Negative Lab Pro, photography, shading, vignetting
Flat field calibration frame

An additional benefit of using flat-field correction is with stitching of multiple frames to increase the resolution of scanned images. For example, after cropping, the 6×6 photo above captured in a single frame with a 24-megapixel camera has a resolution of only about 12 megapixels. But a medium format 6×6 negative holds a lot more detail that can be captured by moving the camera closer to the negative and taking multiple images. However, when I’ve attempted this in the past, the shading issue created visible banding across the final stitched image. Flat-Field Correction eliminates this problem allowing for very high resolution stitched negatives. The photo at the top of this post is a stitched composite of 3 images of the medium format negative with a cropped resolution of almost 37 megapixels. I was amazed at the level of detail in the negative when I zoomed in to 100%. Just FYI, I made some strong tonal and color adjustments to this image in Negative Lab Pro, then exported a TIFF copy for some additional work in Lightroom. This image is my personal favorite film photo that I’ve captured-I don’t know why exactly but it’s something about the way Portra captured the colors and the overall scene.

Flat-Field Correction provides excellent results, is quick and easy to use, and maintains an all-raw workflow within Lightroom for color-correcting scanned negatives. I will definitely be using this tool as a regular part of my camera-scanning workflow with Negative Lab Pro.

3 Comments

  1. Hi! Just so I understood it correctly. You only set the white balance on the Flat Field calibration frame, ran the Flat Field Correction tool (with all the negatives and calibration frame included), and then changed the white balance off the negatives?

    I tried to set the white balance on the Flat Field calibration frame with all of the negatives included/selected (in other words changing the white balance of the negatives in conjuntion with the calibration frame), and then ran the Flat Field Correction tool. Seemed to work out fine aswell. Any experience with doing it that way/order?

    After the images have been converted to DNG-files, do you change the input to Vuescan/SF Raw DNG in NLP, or do you leave the input to Digital Camera?

    Best regards from a guy who has gone down a rabbithole of Flat Field Corrections adjustments

  2. Andreas, yes, you summed it up correctly. I don’t think the order of setting white balance makes any difference in the process-ultimately the white balance needs to be set on the negative before conversion in NLP. Also, I leave the input set to Digital Camera for conversion.

    How is Flat Field Correction working for you? I find it to be incredibly finicky-when it works the results are fantastic but often it will refuse to do anything or even sometimes applies a correction based on a negative rather than the flat field frame.

    1. Yes, true indeed, it is finicky. Yesterday I compared two copies of the same negative, with the exact same conversion settings in NLP (everything set to default) and Flat Field Correction procedure/method. And they seemed to be slightly different, with one negative having somewhat more orange vignetting. Technically they should’ve been the same.

      The method that worked best for me was by setting the white balance on the calibration frame in conjunction with the negatives, proceed the Flat Field Correction, and then convert them without further adjustments to the white balance. The colors were a bit off, but the vignetting was completely gone (when it was working atleast).

      I haven’t done enough testing to confidently say this is the best way. I’m still in the experimenting phase.

Leave a Reply

Your email address will not be published. Required fields are marked *